PORTABLE HIGH FLOW PUMP WITH METER BT-8500 110V AND 220V

PORTABLE HIGH FLOW PUMP WITH METER BT-8500 110V AND 220V

110V or 220 transfer pump, optimal for customers with high consumption, equipped with mechanic volumetric meter. Ideal for supplying small and large fleets, tanks and reservoir supply for vehicles, agricultural implements, and machinery in general.

Related Products

Description

  • Application container: drums, tanks, reservoirs (not included);
  • Free flow rate: 100 L/min;
  • Power supply: single-phase;
  • Voltage: 110V;
  • Product inlet: 1″ BSP female thread;
  • Product outlet: 1″ BSP female thread;
  • Working pressure: 43 PSI (3 BAR);
  • Motor power: 750W;
  • Rotation: 1,450 rpm;
  • Compatibility: diesel oil;
  • Working temperature: Min. -25°C, Max. 55°C;
  • Amperes: 12.0 A;
  • Motor protection rating: IP55;
  • Net Weight: 25.600 kg
  • Gross Weight: 26.700 kg
  • Length: 320 mm
  • Width: 340 mm
  • Height: 910 mm
  • Material: Steel, aluminum, Rubber
  • Paint: Electrostatic
  • Reservoir: Not Included
  • Free flow: 110 L/min.
  • Voltage: 110v Single-phase or 220v Single-phase
  • Working temp. Min. -25℃, Max. +55℃
  • Maximum Working cycle: 30 minutes
  • Fluid inlet size: 1 inch BSP
  • Fluid outlet size 1 inch BSP
  • Engine: 0.75cv
  • Revolutions per Minute: 1400rpm
  • Engine protection: IP55
  • Max. pressure: 43PSI
  • External cart coating: Electrostatic paint
  • High resistance against corrosion and component displacement;
  • Two-wheeled cart, greater convenience;
  • Time reduction in the transfer of Diesel oil;
  • High flow system, optimal for transfer between reservoirs.
  • The product has engine protection against water, dust, and sand (IP55)
  • Never exceed the specified working cycle
  • Use good quality diesel oil free from impurities such as dust, filings, tow, among others.
  • When transferring Diesel, do it in suitable environment to avoid contamination risks.
  • Never bend, crush the suction or discharge hoses;
  • Always use original spare parts. Keep the original assembly, avoid connecting extra parts.
  • Avoid falls and bumps, operate the equipment always in the vertical position.
  • Never use with ethanol and gasoline or lubricating oil.